4 ft. H x 12 ft. W Pool Fence DIY Section in Black with 5 Poles Featuring a Steel Pin at the Base for a 1/2 in. Hole by poolfence DIY

Easily customizable to fit around your pool, the Black, 12 ft. L x 4 ft. H Pool Fence DIY mesh pool safety system from Life Saver helps protect against accidental falls into your pool and can be installed by yourself. In addition to concrete and substantial surfaces, Pool Fence DIY can be installed into pavers, on sand/crushed stone, on a wood deck, into dirt and other loose surfaces. The fence is constructed of industrial-strength PVC-coated nylon mesh. The UV-resistant mesh provides years of use in all weather conditions. The stainless steel pins exceed most local safety requirements. The fence can be removed when no children are present. To determine how much fencing your pool area needs, measure around the edge of your pool and leave 24 in. to 36 in. for walking and cleaning. After determining the total footage, divide by 12 to calculate the correct number of sections needed. When installed, poles are spaced every 36 in. This package includes a 12 ft. L x 4 ft. H section of mesh pool fence with 5 integrated poles (each with a 1/2 in. stainless steel peg), deck sleeves/caps, safety latch and template (gate sold separately). Installation requires a rotary hammer drill with a standard 5/8 in. x 14 in. (minimum) masonry bit (not included). The optional Pool Fence DIY Drill Guide (sold separately) takes the guesswork out of the drilling for proper installation. Pool Fence DIY offers 7-day-a-week installation support by phone and is backed by a limited lifetime warranty.

• Easy-to-install, do-it-yourself fencing kit helps keep children safe from accidental falls into your pool, tension-based support, each pole uses a 1/2 in. stainless steel peg to be inserted into the ground
• Industrial-strength mesh fence at recommend U.S. CPSC height of 4 ft. with 5 integrated poles with a 1/2 in. stainless steel pin
• Fence can be easily removed when no children are present and re-inserted when needed, non-corrosive latching system without sharp hooks or points
• Package includes 12 ft. section of fencing, 5 poles already assembled/attached, deck sleeves/caps, safety latch and template, gate sold separately
• Backed by a limited lifetime warranty, installation requires a 1/2 in. minimum rotary hammer drill with a standard 5/8 in. L shaft masonry bit which is not included, 7-day-a-week phone support